Detaching And Refitting The Scanner Unit - Kyocera FS-C2626MFP Service Manual

(2) Detaching and refitting the scanner unit

Procedure
1. Remove the document processor (see
page 1-5-52).
2. Remove five connectors and the FFC
from main PWB.
3. Open the scanner unit.
4. Remove the motor wire, CCD wire and
operation panel wires from the wire
holder.
YC36
YC100
Connectors of the main PWB
Figure 1-5-72
CCD wire
Operation panel wires
Figure 1-5-73
1-5-48
2M8/2M9-1
Main PWB
YC102
YC101
YC8
YC108
Wire holder
Moter wire