Detaching And Refitting The Transfer Roller - Kyocera FS-1016MFP Service Manual

(2) Detaching and refitting the transfer roller

<Procedure>
1. Remove the developer unit and drum unit
(See page P.1-5-6).
2. Remove the transfer roller from bushes.
3. Check or replace the transfer roller and refit
all the removed parts.
Paper passing direction
Short
Transfer roller
Bush
Transfer roller gear
Bush
(black)
Spring
(black)
Figure 1-5-5Removing the transfer roller
Long
Paper passing
direction
Transfer roller
Bush
Spring
2G4
1-5-5