Figure 4-9 Removing The Keyboard Deck (Part 2); Figure 4-10 Disconnecting The Lcd Assembly Cable - Digital Equipment HiNote VP 500 Series Service Manual

________________________ Installation Notes ______________________
1. Be sure to reconnect the ground wire.
2. When installing the end caps removed in step 2, make sure the nibs inside the
end caps slide into the appropriate catch on the Keyboard Deck.
3. The center cap has two catches that slide over nibs on the Keyboard Deck.
______________________________________________________________

Figure 4-9 Removing the Keyboard Deck (Part 2)

Figure 4-10 Disconnecting the LCD Assembly Cable

FRU Replacement
Digital HiNote VP 500 Service Guide 4–11