Setting Admin. Password; Changing Admin. Password; Disabling Admin. Password - Digital Equipment HiNote VP 500 Series Service Manual

Setting Admin. Password

To set the Admin. Password, move the highlighted cell to the Admin. Password field and
press <Enter>. The following dialogue box will appear:
1. Type in your password and press <Enter>. The password can be up to seven
alphanumeric characters. Symbols and other keys are ignored.
2. Type the password in a second time to confirm. Press <Enter> a second time. The
System Password is now set.

Changing Admin. Password

To change the Admin. Password, move the highlighted cell to the Admin. Password field and
press <Enter>. When the Admin. Password dialogue box appears, enter the new password.
Enter it a second time to confirm. The new password is now set.

Disabling Admin. Password

To disable the Admin. Password:
1. Open the Admin. Password dialogue box.
2. Continue to press the <space bar> until the cursor moves to the end of the Confirm new
password field.
3. Continue to press the <back space> key until the cursor returns to the beginning of the
Enter New Password field. Press <Enter>. This erases the password.
4. Complete the same steps in the New Password field to confirm the task. The old
password is erased and Admin. Password is disabled.
2–8 Digital HiNote VP 500 Service Guide
Enter new password:
Confirm new password:
Set Admin. Password
[ ]
[ ]