Fru Replacement; Required Tools; Removing The Battery - Digital Equipment HiNote VP 500 Series Service Manual

This chapter provides detailed procedures for replacing the Digital HiNote VP 500 series
notebook computer Field Replaceable Units (FRUs). Unless otherwise noted the replacement
procedures for the FRUs are the reverse of the removal procedures.

Required Tools

You will need the following tools to remove and replace the HiNote VP 500 series FRUs.:
•
#0 and #1 Phillips Head Screwdrivers
•
3/16 inch and 7/32 inch Nut Drivers

Removing the Battery

The battery is located on the right side of the system unit (Figure 4-1).
To remove the battery pack:
1. Slide the battery lock/release clip to the release position.
2. Pull the Battery Pack out of the system unit as shown.

FRU Replacement

Digital HiNote VP 500 Service Guide 4–1
4