Removing Fdd/Cd Modules And Supplementary Battery; Figure 4-2 Removing The Fdd Module, Cd Module, Supplementary Battery - Digital Equipment HiNote VP 500 Series Service Manual

Removing FDD/CD Modules and Supplementary Battery

To remove the FDD module, CD module or supplementary battery:
1. Slide the locking button (1), located on the bottom of the system, in the direction shown
(Figure 4-2).
2. Slide and hold the module release latch (2) in the direction shown.
3. While holding the module release latch in position, slide the module out of the system
unit (3).

Figure 4-2 Removing the FDD Module, CD Module, Supplementary Battery

FRU Replacement
Digital HiNote VP 500 Service Guide 4–3