Integrated Peripherals (Peripherals Submenu); Figure 2-4 The Bios Setup Integrated Peripherals Menu - Digital Equipment HiNote VP 500 Series Service Manual

Integrated Peripherals
Move the highlighted cell to this field and press <Enter> to open the submenu.
The following settings are available in the Integrated Peripherals Menu screen of the BIOS
Setup Program(Figure 2-4).

Figure 2-4 The BIOS Setup Integrated Peripherals Menu

Field
Serial Port
Infrared
Parallel Mode
* Default value.
2–6 Digital HiNote VP 500 Service Guide
(Peripherals submenu)
Settings
Auto
Disabled
COM 1 (3F8h - IRQ4) *
COM 2 (2F8h - IRQ3)
COM 3 (3E8h - IRQ4)
COM 4 (2E8h - IRQ3)
Auto
Disabled*
COM 1 (3F8h - IRQ4)
COM 2 (2F8h - IRQ3)
COM 3 (3E8h - IRQ4)
COM 4 (2E8h - IRQ3)
Disabled
Normal
Bi-Directional *
EPP Mode
(Extended Parallel Port)
ECP
(Extended Capabilities)
Description
Enables, configures or disables the
serial port.
Set the serial port to disable to
increase the battery run time.
Enables, configures or disables the
infrared port.
Set the infrared port to disable to
increase the battery run time.
Disables the parallel port.
Parallel port is set for data-out mode
only.
Parallel port permits both data
output and data input.
Operates only with EPP aware
peripherals.
Operates only with ECP aware
peripherals. See your parallel device
user's guide.