Paper Mis-Feed In Flapper Section (J-10) - KIP 2001 User Manual

3.1.2 Paper mis-feed in the Flapper Section (J-10)
When a paper mis-feed occurs in the Flapper Section, the Operation Panel will indicate a "J-10".
J 10
Clear the mis-feed using the following procedure:
1) Open the Roll Deck which media was printing from.
1st
2nd
3rd
2) Wind up the roll media back onto the core.
K66um3e1eng.doc (Ver. A.2)
job
3-4
PLAIN PAPER
VELLUM
TRACING
FILM
TEST