CAUTION
Photoconductive Drum
There is a Photoconductive Drum (green cylinder)
in the printer. Do not touch the drum!
Do not leave the Upper Unit open for a
long period as the Drum is very sensitive to
light. (Direct sunlight is very harmful.)
That stated, remove the mis-feed media and then
close the Upper Unit immediately after the media
is removed. Do not leave upper unit open!
If the Drum is damaged, you will have to replace
It, as it is a very important part in creating
the print image.
2) On the back or rear of the printer, press levers (C)
on to open the Heater Unit (D).
C
D
K66um3e3eng.doc (Ver. A.2)
3-12