Connecting The Mains Cable - SPHINX MYTH 11 User Manual

In 'stand-by' mode the bias current of the power
amp is set to a lower level, which drastically
decreases the temperature and power
consumption. Additionally it significantly increases
the life span of the component.
The power amp also warms up more quickly so you
will be able to enjoy maximum performance without
significant delay.
Ensure proper connection of the optical cables
(from CONTROL OUT to CONTROL IN), otherwise
the LED next to the STANDBY button (1) on the
front panel may remain off even though the stand-
by mode is activated.
Note: When a the optical connection to another
component is made, the STANDBY button on the
front panel (1) will be inoperative!
If the Myth 11 is placed in strong direct sunlight the
stand-by mode may self-activate. In that case you
should place the supplied dummy connector in the
CONTROL IN (6) jack.
We strongly recommend against placing the
component in direct sunlight.
SPHINX

Connecting the mains cable

Before you connect the cable please check
whether the mains voltage indicated on the
manufacturer's label on the rear panel is the
same as your local mains voltage.
If not: please contact your dealer and do not
connect the component to the mains.
Connect the mains cable after you have connected
all other components in the system and have
double-checked all connections.
Myth 7
7