Sony Digital8 DCR-TRV410 Service Manual page 46

2-2. FRONT PANEL ASSEMBLY, CABINET (R) ASSEMBLY
7 FP-77 flexible board (22P)
9 Cushion (N)
2 Screw (M2 × 4),
lock ace, p2
6 Remove the claws
Remove it while taking
care as the FP-77 flexible
cable is connected.
8 Panel (N4) (front)
assembly
2-3. PC-72 BOARD (TRV510/TRV510E)
1 Two tapping
screws (B2 × 5)
2 Connector
retainer
4 EM-50 harness
3 Three tapping
screws (B2 × 5)
[PC-72, MA-356 BOARDS CHECK SERVICE POSITION]
Adjustment remote
commander (RM-95)
LANC jack
Base
(Use box or the like.)
FP-77 flexible board (22P)
MA-356 board
FP-76 flexible board (8P)
5 Open the
jack cover
4 Screw (M2 × 4),
lock ace, p2
!∞ FP-79 flexible
board (80P)
(TRV510/TRV510E)
!£ Two screws
(M2 × 4),
lock ace, p2
5 PC-72 board
- 2 1
V C
Control switch block
(MF-9500) (4P)
3
- 2 1
V C
1 Screw
3 Screw
(M2 × 4),
(M2 × 4),
lock ace, p2
lock ace, p2
2-4. MA-356 BOARD
CPC-13 jig
(J-6082-443-A)
FP-79 flexible board (80P)(TRV510/TRV510E)
3
2-3
!™ Screw (M2 × 4),
lock ace, p2
!¶ EM-50 harness
TRV510/
TRV510E
!§ Screw (M2 × 3),
Remove only in
TRV510/TRV510E
!¡ Screw (M2 × 4),
lock ace, p2
!¢ Remove the claws
!º Three screws (M2 × 4),
lock ace, p2
!• Cabinet (R) assembly
2 FP-76 flexible board (8P)
1 Two tapping screws (B2 × 5)
3 Two tapping screws
(B2 × 5)
6 Tapping screw
(B2 × 5)
4 Control switch block
(MF-9500) (4P)
5 Two harnesses
(from microphone)
7 MA-356 board
CPC-13 jig
Insulater
side
DC IN
AC POWER
AC IN
ADAPTOR
PC-72 board (TRV510/TRV510E)
Base
(Use box or the like.)
Cabinet (R) assembly