Sony Digital8 DCR-TRV410 Service Manual page 165

2-4. MSW Code
• The lower parts of the data of C page, addresses 3A, 3E and 42
(or F page, addresses 12, 16 and 1A) represent the MSW codes
(mode switch mechanism position) when errors occurs.
• The upper parts of the data of C page, addresses 3A, 3E and 42
(or F page, addresses 12, 16 and 1A) represent, when the
mechanism position is to be moved, the MSW codes at the start
movement (when moving the loading motor).
• The lower parts of the data of C page, addresses 3B, 3F and 43
(or F page, addresses 13, 17 and 1B) represent the MSW codes
of the desired movement when the mechanism position is to be
←
moved.
Unloading
EJECT
Mechanism position
MSB
MODE SW C
MODE SW B
MODE SW A
Releasing lock of
cassette campartment
Mechanism Position MSW Code
EJECT
BL
USE
LOAD
STOP
TURN
REC/PB
REW
BL USE BL
LS chassis movement range
Position at which the cassette compartment lock is released. The mechanism will not move any
1
further in the unloading direction.
BLANC code. Between two codes. The mechanism will not be stopped by this code while it is
7
operating.
EJECT completion position. When the cassette is ejected, the mechanism will stop at this
3
position.
2 Code during loading/unloading. Code that is used while the LS chassis is moving.
Normal stop position. The pinch roller separates, the tension regulator returns, and the brakes of
6
both reels turn on.
4 Position at which is used when the pendulum gear swings from S to T or from T to S.
PB, REC, CUE, REV, PAUSE, FF positions.
0
The pinch roller is pressed and tension regulator is on.
REW position. REW are carried at this position.
5
The mechanism will not move any further in the loading direction.
LOAD BL STOP
BL
Pinch roller is detached
Contents
5-70
TURN BL REC/PB
Pinch roller is pressed
→
Loading
BL REW