Member's Mark 720-0778C Assembly & Operating Manual page 39

Natural Gas Conversion for Model# 720-0778C
Match light
1. If the burner will not light after several attempts them the burner can be match lit, before using the match
allow 5 minutes for any accumulated gas to dissipate.
2. Clip a paper match on one end of the lighting rod.
3. Light match.
4. Hold lighting rod and insert lighted match right next to the burner ports or ceramic file.
5. Push and turn the designated control knob to IGNITE/HIGH.
6. Burner should ignite immediately.
IGNITE / HIGH
39
OFF
LoW