Removing And Replacing The Lens - Motorola Timeport 280 Service Manual

Level III Service Manual
G

Removing and Replacing the Lens

6881038B15
2. Using the flat end of the disassembly tool, pry the speaker from its cavity in
the front housing.
The speaker is fastened to the front housing with adhesive. Exercise care when
removing to prevent damage to the front housing.
3. To replace the speaker, remove the protective backing from the new speaker,
then press the speaker into place in the front housing cavity. Be sure the
speaker is straight and fully seated within the cavity.
4. Replace the IR port lens, transceiver board, rear housing, rear escutcheon,
antenna, battery, and battery cover as described in the procedures.
1. Remove the battery cover, battery, antenna, rear escutcheon, rear housing,
transceiver board, keypad, microphone, volume buttons, voice button, power
button, IR port lens, and speaker as described in the procedures.
A
FRONT HOUSING
B
Figure 23. Removing the lens
May 14, 2001
CATCH
LENS
DISASSEMBLY TOOL
Disassembly
010412o
33