Removing And Replacing The Battery Cover Latch - Motorola Timeport 280 Service Manual

Gsm 900/ 1800/ 19000mhz & gprs tech product family b58 tri-band telephone

Hide thumbs Also See for Timeport 280:

Table of Contents

Level III Service Manual

Removing and Replacing the Battery Cover Latch

6881038B15

Remove the battery cover, battery, SIM card, antenna, rear escutcheon, and

rear housing as described in the procedures

Using long-nose pliers, carefully squeeze the battery cover latch catches

together to release the battery cover latch from the rear housing. See

Figure 12A.

LONG-NOSE PLIERS

BATTERY COVER LATCH

Figure 12. Removing the battery cover latch

Remove the battery cover latch spring from the housing. Set aside for reuse.

To replace, set the battery cover latch spring on its post in the rear housing

then insert the latch into its rear housing cavity until it snaps into place. Verify

proper operation of the latch by temporarily installing a battery cover.

Replace the rear housing, rear escutcheon, antenna, SIM card, battery, and

battery cover as described in the procedures.

May 14, 2001

Disassembly

REAR HOUSING

BATTERY COVER

LATCH SPRING

010401o

Table of Contents