Level III Service Manual
Removing and Replacing the Keypad
6881038B15
1.
Remove the battery cover, battery, antenna, rear escutcheon, rear housing, and
transceiver board as described in the procedures
2.
Lift the keypad from the front housing as shown in Figure 18.
KEYPAD
Figure 18. Removing the keypad
3.
To replace, insert the keypad into the front housing, ensuring the keys align
properly with the openings in the front housing.
4.
Replace the transceiver board, rear housing, rear escutcheon, antenna, battery,
and battery cover as described in the procedures.
May 14, 2001
.
FRONT HOUSING
DISASSEMBLY TOOL
Disassembly
010407o
29