Removing And Replacing The Rear Escutcheon; Removing And Replacing The Rear Housing - Motorola Timeport 280 Service Manual

Gsm 900/ 1800/ 19000mhz & gprs tech product family b58 tri-band telephone

Hide thumbs Also See for Timeport 280:

Table of Contents

Disassembly

Removing and Replacing the Rear Escutcheon

REAR ESCUTCHEON

REAR HOUSING

Figure 8. Removing the rear escutcheon

Remove the battery cover, battery, and antenna as described in the procedures.

Using the flat end of the disassembly tool, carefully pry the escutcheon from

the rear housing to expose the two housing screws located beneath. See

Figure 8.

To replace, remove the protective paper backing from the new escutcheon and

carefully align the escutcheon with the cavity molded into the rear housing.

Press the escutcheon firmly into place making sure pressure is applied evenly

across the entire surface to ensure a tight bond.

Replace the antenna, battery, and battery cover as described in the procedures.

This product contains static-sensitive devices. Use anti-static handling procedures

to prevent electrostatic discharge (ESD) and component damage.

The housing is fastened with plastic catches. These are delicate and should be parted

using utmost care.

May 14, 2001

DISASSEMBLY TOOL

P280

.010397o

6881038B15

Table of Contents