Removing And Replacing The Battery Latch - Motorola Timeport 280 Service Manual

Gsm 900/ 1800/ 19000mhz & gprs tech product family b58 tri-band telephone

Hide thumbs Also See for Timeport 280:

Table of Contents

Disassembly

Removing and Replacing the Battery Latch

Remove the battery cover, battery, SIM card, antenna, rear escutcheon, and

rear housing as described in the procedures

LONG-NOSE PLIERS

BATTERY LATCH SPRING

REAR HOUSING

Figure 11. Removing the battery latch

Using long-nose pliers, carefully depress the battery latch spring and remove

from the assembly. Set the spring aside for reuse. See Figure 11A.

With the long-nose pliers, squeeze the 2 battery latch catches inward to release

the battery latch from the housing. Slide the latch downward and lift from the

housing as shown in Figure 11B.

To replace, slide the latch into the housing until it locks into place.

Carefully reinstall the spring and verify proper operation of the latch by

temporarily inserting a battery into the housing.

Replace the rear housing, rear escutcheon, antenna, SIM card, battery, and

battery cover as described in the procedures.

May 14, 2001

P280

BATTERY LATCH

010400o

6881038B15

Table of Contents