Elation Design LED Par Zoom MH User Manual
  1. Manuals
  2. Brands
  3. Elation Manuals
  4. Lighting Equipment
  5. Design LED Par Zoom MH
  6. User manual
Elation Design LED Par Zoom MH User Manual

Elation Design LED Par Zoom MH User Manual

Design led par zoom mh
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Design LED Par Zoom MH
Elation Professional
6122 S. Eastern Ave.
Los Angeles, Ca. 90040
www.elationlighting.com
Rev. 06/09/2010-visage
Ver. 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Design LED Par Zoom MH and is the answer not in the manual?

Questions and answers

Related Manuals for Elation Design LED Par Zoom MH

Summary of Contents for Elation Design LED Par Zoom MH

  • Page 1 Design LED Par Zoom MH Elation Professional 6122 S. Eastern Ave. Los Angeles, Ca. 90040 www.elationlighting.com Rev. 06/09/2010-visage Ver. 1.0...
  • Page 2 Design LED Par Zoom MH™ ©Elation Professional Design LED Par Zoom MH™...

  • Page 3: Table Of Contents

    Design LED Par Zoom MH™ CONTENTS General Information……………………………………………………………………… 4 a. Introduction………………………………………………………………………. 4 b. Unpacking………………………………………………………..…………..… 3 c. Customer Support…………………………………………….………………… 4 d. Warranty Registration……………………………………………………..…… 5 Safety Instructions………………………………………………………..…………. 6 Features…………………………………………………………………………………… 8 General Guidelines………………………………………………………………………. 9 Fixture Overview…………………………………………………………………………. 10 Mounting and Installation………………………………………………………….……. 13 a. Mounting Positions……………………………………………………………… 13 b.

  • Page 4: General Information

    INTRODUCTION: Congratulations, you have just purchased one of the most innovative and reliable lighting fixtures on the market today! The Design LED Par Zoom MH™ has been designed to perform reliably for years when the guidelines in this booklet are followed.

  • Page 5: Warranty Registration

    Elation Encourages Recycling: Please do not discard the shipping carton in the trash. Please recycle whenever possible. WARRANTY REGISTRATION: The Design LED Par Zoom MH™ carries a two year (730 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase.

  • Page 6: Safety Instructions

    2. Never touch the fixture during normal operation. This can cause severe personal injuries and/or damage to the fixture. 3. Be sure to unplug the DESIGN LED PAR ZOOM MH™ from the power outlet before performing any service related issues.

  • Page 7: Features

    Design LED Par Zoom MH™ 3. FEATURES • Pan 540˚ / Tilt 265° • Firmware Upgradeable via Elation E-Load Programming Device • Low power consumption • Minimal heat emission • Equipped with 36 Tricolor, 3 watt LEDs: (12 red, 12 blue, 12 green) •...

  • Page 8: General Guidelines

    Design LED Par Zoom MH™ 4. GENERAL GUIDELINES This fixture is a professional lighting effect designed for use on stage, in nightclubs, in theatres, etc. Do not attempt operation or installation without a proper knowledge on how to This fixture was designed for indoor use only, use of this product outdoors will void all warranties written or implied.

  • Page 9: Fixture Overview

    Design LED Par Zoom MH™ 5. FIXTURE OVERVIEW 1) LED LENS ASSEMBLY – 36 Tricolor, 3 watt LEDs rated at 100,000 hours (12 red, 12 green, 12 blue). 2) YOKE ASSEMBLY- Holds all the electronics and motors that generate the tilt ©Elation Professional...
  • Page 10 Design LED Par Zoom MH™ movement. 3) TRANSPORT HANDLE – This fixture contains a build-in carrying handle be sure to always transport this fixture by the handle and never by grasping the head or yoke assembly. 4) BASE ASSEMBLY – The main base holds the majority of the electronics and logic boards.
  • Page 11 In the event of fuse failure, always be sure to replace with an exact match fuse unless other wise specified by an authorized Elation Professional technician. 13) DMX OUTPUT JACK – This 3-pin XLR jack sends a DMX signal to another DMX fixture.

  • Page 12: Mounting And Installation

    Never stand directly below the device when mounting, removing, or servicing the fixture. Mounting The DESIGN LED PAR ZOOM MH™ is fully operational in two different mounting positions, hanging upside-down from a ceiling, or set on a flat level surface (see illustration on next page).

  • Page 13: Mounting Points

    Design LED Par Zoom MH™ Be sure to complete all rigging and installation procedures before connecting the main power cord to the appropriate wall outlet. Mounting points Overhead mounting requires extensive experience, including amongst others calculating working load limits, a fine knowledge of the installation material being used, and periodic safety inspection of all installation material and the fixture.

  • Page 14: Securing

    Securing the DESIGN LED PAR ZOOM MH™ Regardless of the rigging option you choose for your DESIGN LED PAR ZOOM MH™ always be sure to secure your fixture with a safety cable. The fixture provides a built-in rigging point for a safety cable on the hanging bracket as illustrated above. Be sure to only use the designated rigging point for the safety.

  • Page 15: Understanding Dmx

    1 to that fixture no matter where it is located in the DMX chain. The Design LED Par Zoom MH™ can be controlled via DMX-512 protocol. The Design LED Par Zoom MH™ is a 13-channel DMX fixture. The DMX address is set electronically using the controls on the LCD menu.
  • Page 16 Design LED Par Zoom MH™ Be sure to follow the above figure when making your own cables. Do not use the ground lug on the XLR connector. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR’s outer casing. Grounding the shield could cause a short circuit and erratic behavior.

  • Page 17: Dmx Terminator

    Design LED Par Zoom MH™ DMX-512 connection with DMX terminator A DMX terminator should be used in all DMX lines especially in longer runs. The use of a terminator may avoid erratic behavior in your DMX line. A terminator is a 120 ohm 1/4 watt resistor that is connected between pins 2 and 3 of a male XLR connector (DATA + and DATA -).
  • Page 18 That means changing the settings of one channel will only affect the selected fixture. In the case of the Design LED Par Zoom MH™, which is a 13 channel fixture (default can also be 11), you should set the starting DMX address of the first unit to 1, the second unit to 14 (13 + 1), the third unit to 27 (13 + 14), and so on.

  • Page 19: Fixture Menu

    Design LED Par Zoom MH™ FIXTURE MENU On-Board System Menu: The DESIGN LED PAR ZOOM MH™ comes with an easy to navigate system menu. This next section will detail the functions of each command in the system menu. LED Control Panel: The control panel located on the top, front of the fixture allows you to access the main menu and make all necessary adjustments to the Design LED Par Zoom MH™.

  • Page 20: Menu Functions

    Design LED Par Zoom MH™ CLMT Clear fixture running time RPAN ON/OFF Reverses the pan movements RTLT ON/OFF Reverses the tilt movements FINE ON/OFF Switch between 16 bit/8 bit DEGR 540/630 Pan degree select M-XX Mic sensitivity Display the DMX512 value of each VALU D–XX D-00 (DXXX)
  • Page 21 Design LED Par Zoom MH™ communicate with a controller properly. The DMX addressing also allows the fixture to ignore any DMX information coming from the controller that is not meant specifically for the fixture. Because each fixture is connected in a daisy-chain fashion it is imperative to assign a proper and unique starting DMX address to each and every fixture.
  • Page 22 Design LED Par Zoom MH™ Master/Slave or a stand-alone operating mode Follow the procedure below to enter the audio menu: 1. Access the main menu. 2. Tap the UP or DOWN button until “PLAY” is displayed, press ENTER. 3. Tap the UP or DOWN button until “AUDI” is displayed, press ENTER.
  • Page 23 Design LED Par Zoom MH™ 3. Tap the UP button until “ALL” is displayed, press ENTER. 4. The display will show “ON/OFF”. Press the UP button to select “ON” to reset the color motor. 5. Press ENTER to confirm 6. Press MODE/ESC to return to the main menu.
  • Page 24 Design LED Par Zoom MH™ 4. Press MODE/ ENTER, the display will show “ON/OFF”. 5. Press the UP button to select “ON” to activate this function, or “OFF” to deactivate this function. 6. Press ENTER to confirm. 7. Press MODE/ESC to return to the main menu.
  • Page 25 Design LED Par Zoom MH™ 2. Tap the UP button until “FINE” is displayed, press ENTER. 3. The display will show “ON/OFF”. 4. Press the UP button to select “ON” to activate this function, or “OFF” to deactivate this function.
  • Page 26 Design LED Par Zoom MH™ adjusted through the use of a DMX console. 1. Access the main menu. 2. Tap the UP button until “DISP” is displayed. 3. Press ENTER, the display will show “VALU”. 4. Press ENTER, once again “d-00” will be displayed.
  • Page 27 Design LED Par Zoom MH™ activated, the keys will be automatically locked in 15 seconds from the last press. In order to deactivate the keylock status, press the Mode/Esc-button for 3 seconds. 1. Access the main menu. 2. Tap the UP button until “DISP” is displayed.
  • Page 28 Design LED Par Zoom MH™ FEED - Use this function to activate the pan/tilt error correction. 1. Access the main menu. 2. Tap the UP button until “SPEC” is displayed, press ENTER. 3. Tap the UP button until “FEED” is displayed, press ENTER.
  • Page 29 Design LED Par Zoom MH™ ADJU - This function is used to calibrate the various internal motors in the event the internal homing mechanism become slightly out of adjustment. This function is protected with a password to prevent unauthorized personal from tampering with the fixture. To enter the calibration menu follow the steps below: 1.
  • Page 30 Design LED Par Zoom MH™ TIME (Time) - Running time of the entire program. CEDT - Edit program using a external controller. REC – Auto save function. RUN – Program test mode. REC - Records scenes automatically from any external DMX controller and stores them inside the fixtures built-in memory.
  • Page 31 Design LED Par Zoom MH™ SC01 - This function allows you to choose the total number of scenes in your internal program. 1. Access the main menu. 2. Tap the UP button until “EDIT” is displayed, press ENTER. 3. Tap the UP button until “SC01” is displayed.
  • Page 32 Design LED Par Zoom MH™ represents the time needed to run this scene. For example, T002 means scene 1 needs 0.4 seconds to run, T-15 means this scene needs 3.0 seconds to run. Note: “XX is always 0.2 seconds not one second.
  • Page 33 Design LED Par Zoom MH™ 2. Tap the UP button until “EDIT” is displayed, press ENTER. 3. Tap the UP button until “RUN” is displayed, press ENTER. 4. The display will show “ON/OFF”. 5. Press the UP button to display “ON” to activate this function, or “OFF” to deactivate this function.

  • Page 34: Dmx Addressing

    Design LED Par Zoom MH™ 9. DMX ADDRESSING Setting the DMX address - After the fixture is turned “ON” it will immediately complete a reset process that test all the fixture’s functions. When the reset process concludes the LCD will display the fixture’s current DMX address. If the fixture is not receiving a DMX signal, the display will flash continuously.
  • Page 35 Design LED Par Zoom MH™ 7. Press MODE/ESC to return to the main menu. Controller Settings: 1. Set the DMX value of channel 1 to a value of 7. 2. Set the DMX value of channel 2 to a value of 7 or 8. When channel 2 is set to "7"...

  • Page 36: Operation

    Design LED Par Zoom MH™ 10. OPERATION Operating Modes: The Design LED Par Zoom MH™ can operate in several different modes. This next section will detail the differences in the operating modes. • Auto Program Mode (Master) - The fixture will chase through the built-in programs, sending a DMX control signal to all other fixtures connect via DMX cables instruction for a synchronized light show.
  • Page 37 16 fixtures to be linked together to provide a synchronized light show without the use of a controller. Only use this when linking several Design LED Par Zoom MH together for use without a controller. Any fixture can act as a “Master or a “Slave.”...

  • Page 38: Dmx Channel Traits

    Design LED Par Zoom MH™ 11. DMX CHANNEL TRAITS The chart below details the channel layout for 13 DMX channels (default). In 8bit mode the “Pan Fine” and “Tilt Fine” channels are not used, thus converting the fixture into an 11-channel DMX fixture.
  • Page 39 Design LED Par Zoom MH™ DMX channel functions and values (13DMX channels): Channel 1 - PAN movement 8bit: Channel 2 – Pan fine Channel 3 - TILT movement 8bit: Channel 4– Tilt fine Channel 5 - Red: 0-255 Red (0-Black, 255-100% Red)
  • Page 40 Design LED Par Zoom MH™ 168-175 Color macro 22 176-183 Color macro 23 184-191 Color macro 24 192-199 Color macro 25 200-207 Color macro 26 208-215 Color macro 27 216-223 Color macro 28 224-231 Color macro 29 232-239 Color macro 30...
  • Page 41 Design LED Par Zoom MH™ 120-139 Internal program 2 140-159 Internal program 3 160-179 Internal program 4 180-199 Internal program 5 200-219 Internal program 6 220-239 Internal program 7 240-255 Gradient effect ©Elation Professional Design LED Par Zoom MH™...

  • Page 42: Error Codes

    Design LED Par Zoom MH™ 12. ERROR CODES: When power is applied, the unit will automatically enter a “reset/test” mode. This mode brings all the internal motors to a home position. If there is an internal problem with one or more of the motors an error code will flash in the display in the form of “XXer”...
  • Page 43 Design LED Par Zoom MH™ defective motor IC drive on the main PCB). 093Er – Zoom movement error: The lens assembly is not located in the default home position after start-up or after a reset command. This message will appear after a fixture reset if the tilt magnetic-indexing circuit malfunctions (sensor failed or magnet is missing) or there is a stepper motor failure (defective motor or a defective motor IC drive on the main PCB).

  • Page 44: Cleaning And Maintenance

    Design LED Par Zoom MH™ 13. CLEANING AND MAINTENANCE Please refer to the following points during normal inspection: 1. Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall out during normal operation resulting in damage or injury as larger parts could fall.

  • Page 45: Photometric Data

    Design LED Par Zoom MH™ PHOTOMETRIC DATA: ©Elation Professional Design LED Par Zoom MH™...
  • Page 46 Design LED Par Zoom MH™ ©Elation Professional Design LED Par Zoom MH™...

  • Page 47: Dimensional Drawings

    Design LED Par Zoom MH™ DIMENSIONAL DRAWINGS: ©Elation Professional Design LED Par Zoom MH™...

  • Page 48: Circuit Schematic

    Design LED Par Zoom MH™ 16. CIRCUIT SCHEMATIC: ©Elation Professional Design LED Par Zoom MH™...

  • Page 49: Warranty

    B. For warranty service, send the product only to the Elation Professional® factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, Elation Professional®...
  • Page 50 F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above. Except to the extent prohibited by applicable law, all implied warranties made by Elation Professional® in connection with this product, including warranties of merchantability or fitness, are limited in duration to the warranty period set forth above.

  • Page 51: Technical Specifications

    Design LED Par Zoom MH™ 18. TECHNICAL SPECIFICATIONS Power supply □100VAC, 50Hz; □120VAC,50Hz; □208VAC, 50Hz; Power consumption □220VAC, 50Hz; □230VAC,50Hz; □240VAC, 50Hz; □100VAC,60Hz; □120VAC,60Hz; □208VAC,60Hz; □220VAC,60Hz; □230VAC,60Hz; □240VAC,60Hz; Power Consumption 150W Fuse protection 120V = 4A/250V, GMA (5x20mm fine-wire fuse)
  • Page 52 Elation Professional 6122 S. Eastern Ave. Los Angeles, CA. 90040 323-582-3322 / 323-582-3108 fax www.ElationLighting.com / Info@ElationLighitng.com Rev. 06/09/2010-visage Ver. 1.0...

Table of Contents