Introduction The information in this instruction manual covers the installation of the S-10CM In-Ceiling Mount for the S10-CH Mini Camera Dome. This mount should only be installed by a qualified technician using approved materials and wiring practices in accordance with the National Electrical Code ANSI/NFPA 70, state, and local electrical codes.
Page 4
Figure 1: In-Ceiling Installation Setup 3. Attach the trim ring to the camera dome mounting base with the three holders and M3.0 screws provided. 4. Secure the safety wire to the camera base/trim ring assembly in the hole provided with the M3.0 screw and hook the other end of the safety cord to the mounting bracket.
Shipping Instructions Use the following procedure when returning a unit to the factory: 1. Call or write Vicon for a Return Authorization (R.A.) at one of the locations listed below. Record the name of the Vicon employee who issued the R.A.
Technical Information MECHANICAL Application: Indoor. Mounting: In-ceiling. Dimensions: In-Ceiling Diameter: 8.0 in. (203 mm). Height: 5.25 in. (133 mm). Weight: In-Ceiling: 1.1 lb (0.5 kg). Construction: In-Ceiling: steel. 2 • Technical Information XX183-50-00 Rev 1107 S-10X Mounts...
Page 9
Software supplied either separately or in hardware is furnished on an “As Is” basis. Vicon does not warrant that such software shall be error (bug) free. Software support via telephone, if provided at no cost, may be discontinued at any time without notice at Vicon’s sole discretion.
Page 10
Vicon Industries Inc. Corporate Headquarters 89 Arkay Drive Hauppauge, New York 11788 631-952-CCTV (2288) 800-645-9116 Fax: 631-951-CCTV (2288) &Infofax: 800-287-1207 Vicon Europe Headquarters Brunel Way Fareham, PO15 5TX United Kingdom +44 (0) 1489 566300 Fax: +44 (0) 1489 566322 Germany...
Need help?
Do you have a question about the S-10CM and is the answer not in the manual?
Questions and answers