Stator Voltage Test - Lincoln Electric COMMANDER 400 SVM133-B Service Manual

F-51
Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician or
machine operator and will invalidate your factory warranty. For your safety and to avoid elec-
trical shock, please observe all safety notes and precautions detailed throughout this manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical troubleshoot-
ing assistance before you proceed. Call 1-800-833-9353 (WELD).
TEST DESCRIPTION
This test will determine if the correct AC voltages are being generated from the stator
windings.
MATERIALS NEEDED
Volt/Ohmmeter
3/8" Nut driver
Wiring Diagram
7/16" Wrench
This procedure takes approximately 55 minutes to perform.
TROUBLESHOOTING & REPAIR

STATOR VOLTAGE TEST

WARNING
COMMANDER 400
F-51