Engine, Stator/Rotor Removal And Replacement - Lincoln Electric COMMANDER 400 SVM133-B Service Manual

F-105

ENGINE, STATOR/ROTOR REMOVAL AND REPLACEMENT

Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician or
machine operator and will invalidate your factory warranty. For your safety and to avoid elec-
trical shock, please observe all safety notes and precautions detailed throughout this manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical troubleshoot-
ing assistance before you proceed. Call 1-800-833-9353 (WELD).
DESCRIPTION
This procedure will aid the technician in the removal and replacement of the engine and
stator assembly. This is necessary in order to gain access the stator and/or rotor.
MATERIALS NEEDED
5/16" Nut driver
3/8" Wrench
1/2" Wrench
9/16" Socket Wrench
11/16" Socket Wrench
7/16" Wrench
3/4" Wrench
3/4" Socket Wrench
Slot head screw driver
Hoist (CHECK WEIGHT LIMITATIONS)
Pliers
5/8" Wrench
1/4" Allen type wrench
1-13/32" Socket wrench
TROUBLESHOOTING & REPAIR
WARNING
This procedure takes approximately 8 hours to perform.
COMMANDER 400
F-105