Cascading" Menu (Cascade) - Honeywell SDC Service Manual

Operation
5.4.13
Para- Designation
meter
01 Switching
differential
02 Connection delay
03 Switch-off delay
04 Switchover power
of stage sequence
05 Stage reversal
06 Guidance stage
07 Peak-load stage
08 Switchover of base
load with grouping
09* Quick hot-water
connection
110

"Cascading" menu (CASCADE)

The parameters in this menu refer solely to the parameters that
are associated with the cascading of multiple heat generators.
This selection is only available if multiple heat generators exist in
the control system.
Setting range / Setting values
0.5... 30 K
0 ... 200 min
0 ... 60 min
10 ... 100 %
OFF, 1 to 250 h
1 ... maximum number of stages
OFF, 2 ... maximum number of
stages
All heat generators are numbered
consecutively within the cascade.
The total quantity determines the
maximum number of stages.
OFF, ON
OFF, 1 ... maximum number of
stages
* OEM
SDC / DHC
Factory Setting
setting
4
0
0
65
OFF
1
OFF
OFF
OFF
EN2H-0221GE51 R0812