Color Temperature (White Balance) Adjustment; Brightness/Contrast Adjustment - Sony PVM-L2300 Operation Manual
Lcd video monitor
Hide thumbs
Also See for PVM-L2300:
- Operation manual (142 pages) ,
- Manual (20 pages) ,
- Product manual (18 pages)
Table of Contents
Advertisement
Automatic adjustment (recommended)
1
Input the reference color-bar signal to the monitor.
2
Select Auto in the Picture Adj menu of the Adjustment
menu and perform the automatic adjustment of the
chroma, phase and matrix in Auto Adjust (page 44).
Manual adjustment
The following is the example of the method to perform the
manual adjustment of the chroma and phase.
1
Input the multi format color-bar signal or SMPTE
color-bar signal to the monitor.
2
Set the BLUE ONLY button to on.
Red and green signals are cut, and only the blue signal
is displayed as a monochrome picture.
The following is the example of the adjustment when the
multi format color-bar signal is used.
3
Select the Manual Adjust menu (page 45) in the Picture
Adj menu of the Adjustment menu and adjust the
levels with the CHROMA or PHASE knob of the
controller while tracking so that the brightness of bars
“a” (Blue part) and “b” (75% White part) (in the
following illustration) are the same.
For the composite and Y/C signals
Adjust the levels with the CHROMA and PHASE
knob.
For the component signal
Adjust the levels with the CHROMA knob.
b (75% White)
4
Press the ENTER or Ent button.
The adjusted data is confirmed.
5
Set the BLUE ONLY button to off.
Color Temperature (White Balance)
Adjustment
You can adjust manually or automatically with a specified
color temperature probe.
Note
When the DVI Computer signal or computer signal input of
HDMI is displayed, the color temperature cannot be
adjusted automatically.
Perform the manual adjustment of the color temperature.
Automatic adjustment
Use one of the following probes.
• Konica Minolta CA-210
• DK-Technologies PM5639/06
• X-Rite Eye-One Pro
1
Connect the color temperature probe.
For the cable to connect the color temperature probe,
see page 130.
2
Select Auto Adjust (page 47) in the Color Temp Adj
menu of the Adjustment menu and adjust the color
temperature.
Manual adjustment
1
Select Manual Adjust (page 46) in Manual of the Color
Temp Adj menu of the Adjustment menu.
2
Adjust the color as desired with the PHASE,
CHROMA or BRIGHT knob.
3
Press the ENTER or Ent button.
The adjusted data is confirmed.
Brightness/Contrast Adjustment
As an image on a color video monitor is seen differently
according to the ambient light (environmental brightness),
adjust the brightness (black level) according to the ambient
light and the black level of the image to be reproduced and
adjust the contrast (white level) according to the ambient
light.
Adjust the brightness/contrast with an external reference
signal of a multi format color-bar signal or SMPTE color-
bar signal.
1
Input the multi format color-bar signal or SMPTE
color-bar signal to the monitor.
Page 31
Adjusting
Advertisement
Table of Contents
