Sony PVM-L2300 Operation Manual page 52

Menu
Slot No
Input No
Screen Aspect
SD
HDMI Auto
Sync Mode
Color Temp
Picture Preset
52
Input Configuration Menu
Function and operation ([
Enters the option slot number.
You can select from Option1 to Option4, Option1&2 or Option3&4.
Adaptor and the item to be selected
Option1 to Option4
• When the BKM-250TG is installed and Format is set to 3G/HD/SD-SDI Auto or 4:2:2
YPbPr 10bit, 4:4:4 YPbPr 10bit, 4:4:4 RGB 10bit, 4:4:4 YPbPr 12bit or 4:4:4 RGB 12bit
of 3G-SDI
• When the BKM-243HS, BKM-244CC or BKM-250TG is installed and Format is set to
HD-SDI/D1 Auto
• When the BKM-220D, BKM-243HS, BKM-244CC or BKM-250TG is installed and Format
is set to D1
• When the BKM-227W is installed and Format is set to Composite Auto, Composite
NTSC, Composite PAL, Composite PAL-M, Composite SECAM, YC Auto, YC NTSC, YC
PAL, YC PAL-M or YC SECAM
• When the BKM-229X is installed and Format is set to Component YPbPr or Component
RGB
Option1&2, Option3&4
• When two BKM-243HS or BKM-244CC are installed in the OPTION 1 and 2 or OPTION
3 and 4 option slots and Format is set to 4:2:2 YPbPr 10bit, 4:4:4 YPbPr 10bit, 4:4:4
RGB 10bit, 4:4:4 YPbPr 12bit or 4:4:4 RGB 12bit of Dual Link HD-SDI
Note
When the setting of Format and the installed adaptor do not match, the setting value may not
be changed. Set the Format correctly according to the installed adaptor.
Enters the input connector number.
You can select from [Input 1] or Input 2.
Adaptor and the item to be selected
Input 1, Input 2
• When the BKM-250TG is installed and Format is set to 3G/HD/SD-SDI Auto or 4:2:2
YPbPr 10bit, 4:4:4 YPbPr 10bit, 4:4:4 RGB 10bit, 4:4:4 YPbPr 12bit or 4:4:4 RGB 12bit
of 3G-SDI
• When the BKM-243HS, BKM-244CC or BKM-250TG is installed and Format is set to
HD-SDI/D1 Auto
• When the BKM-220D, BKM-243HS, BKM-244CC or BKM-250TG is installed and Format
is set to D1
• When two BKM-243HS or BKM-244CC are installed in the OPTION 1 and 2 or OPTION
3 and 4 option slots and Format is set to 4:2:2 YPbPr 10bit, 4:4:4 YPbPr 10bit, 4:4:4
RGB 10bit, 4:4:4 YPbPr 12bit or 4:4:4 RGB 12bit of Dual Link HD-SDI
Note
When the setting of Format and the installed adaptor do not match, the setting value may not
be changed. Set the Format correctly according to the installed adaptor.
Selects the aspect ratio.
Note
This menu is not selectable when Format is set to DVI Computer.
Sets the aspect ratio of the SD signal.
You can select from [16:9] or 4:3.
Sets the manual or automatic setting for the aspect ratio of the HDMI signal.
Off: Select to set the aspect ratio manually with the controller, etc.
[On]: Select to set the aspect ratio automatically according to the input signal. The
aspect ratio is not set with the controller, etc.
Sets the sync signal when the analog component signal or analog RGB signal is input.
You can select when Format is set to Component YPbPr or Component RGB.
[Internal]: Select when an internal sync signal is used.
External: Select when an external sync signal is used.
Sets the color temperature.
You can select from D93, D65 or User1 to User5.
When D93 or D65 data is changed, they are displayed as D93* or D65*.
Sets the picture adjustment preset.
Select from Preset1 to Preset5.
]: factory setting)