Sony PVM-L2300 Operation Manual page 63

Menu
External Sync
Comb
Aperture
Mono
Blue Only
R Off
G Off
B Off
Chroma Up
Black Frame Insertion
Interlace
Function and operation ([
Sets whether or not to select external sync mode ([Off] or On) when the analog component
signal or analog RGB signal format is input.
When On is selected, the signal to be displayed is synchronized with the sync signal input to
the SYNC connector (External Sync).
When Off is selected, the signal to be displayed is synchronized with the sync signal included
in the signals being monitored (Internal Sync).
Notes
• When Component is set to YPbPr or RGB in Format of the Input Configuration menu, you
can set the external sync.
• The external sync is not set in the following cases:
– When the internal signal is displayed
– When the captured frame is displayed
Sets whether or not to use the comb filter (Off or [On]).
When Off is selected, the trap · band-pass filter (Trap/BPF) is selected.
You can select the type of comb filter in NTSC Comb Filter menu (page 57) of the Display
Setting menu.
Notes
• When Composite is set to Auto, NTSC, PAL or PAL-M in Format of the Input Configuration
menu, you can set the comb filter.
• The comb filter is not set in the following cases:
– When the internal signal is displayed
– When the captured frame is displayed
Sets whether or not to function the aperture modification (Off or On).
[Off] (when the signal is displayed in Aspect Correction mode of the native display), [On]
(when the signal is displayed in mode other than Aspect Correction of the native display)
Note
When Format of the Input Configuration menu is set to DVI Computer or the HDMI computer
signal is input, the aperture modification does not function.
Sets whether or not to display in monochrome mode ([Off] or On).
Sets whether or not to display only the blue signal as a monochrome picture after cutting the
red and green signals ([Off] or On).
Sets whether or not to cut the red signal ([Off] or On).
Sets whether or not to cut the green signal ([Off] or On).
Sets whether or not to cut the blue signal ([Off] or On).
Sets whether or not to increase the chroma value by 12 dB ([Off] or On).
Note
The chroma value is not increased in the following cases:
• When the signal to be displayed is RGB
• When the composite signal is automatically displayed in monochrome depending on the
color discrimination of the input adaptor
• When the internal signal is displayed
Sets whether or not to display in black frame insertion mode ([Off] or On).
Note
The black frame is not inserted in the following cases:
• When Interlace is set to On
• When the 24P or 24PsF input signal is displayed
• When Format of the Input Configuration menu is set to DVI Computer
• When the HDMI computer signal is input
For details of this menu, see "Selecting Display Mode" on page 82.
Sets whether or not to display in interlace mode ([Off] or On).
Notes
• Set Native Scan to On for the interlace display.
• The picture is not displayed in interlace mode in the following cases:
– When Side by Side is set to On
– When Pixel Zoom is set to on
For details of this menu, see "Selecting Display Mode" on page 82.
]: factory setting)
63
Display Function Menu