Consult And Transfer - Cisco TelePresence MX200 G2 User Manual

16 Transfer Call

Consult and Transfer

Assume that
you are in a
call. Tap Hold.
Place the call in the
usual way.
Tap + Place New Call or tap
Resume to go back to the one
you were in call with (to undo
your action).
You are now in the new
call while the one you
were in call with still is
on hold.
Locate
whom to
call in the
usual way.
Tap Swap to
go between
the two parties
and Transfer
to connect the
two together, while you leave the call.
About Consult and Transfer
This feature allows you to be in a call
with two parties, but one at a time
only.
You may swap whom you are in call
with, and you may connect the two
together, while you leave the call.
D1507606 User Guide
Cisco TelePresence SX10, SX20, MX200 G2,
MX300 G2, MX700, MX800, SX80
Produced: December 2014 for TC 7..3
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.