Aquaglide Multisport 270 Owner's Manual page 7

2. Assemble the upper and middle
mast sections by sliding the upper
section inside the middle one until
it is fully seated.
3 Keeping these two mast sections together, slide the mast into the sail
luff sleeve.
B-3
Sail Luff Sleeve
Aquaglide, Inc. #1 North Shore Dr, SE White Salmon, WA 98672
Multisport
B-2
TEL: (509) 493-4938
270 Owner's Manual
™
B-4
4. The mast should seat firmly into the very top of the sleeve and the
stainless padeye on the mast should be in the luff sleeve's upper cutout,
facing out as shown in photo B4.
5. Slide the lower mast section through the bottom part of the sail luff
sleeve. Connect the lower and middle mast sections, making sure that
the sections are seated together completely at the joint.
B-5
for more info go to:
www.Aquaglide.net
FAX: (509) 493-4966
7