Aquaglide Multisport 270 Owner's Manual page 14

C-17
Forestay
17. Reconnect the webbing strap to the forestay using the ladder lock
buckle. Once connected, leave the webbing strap as long as possible.
Tuck the webbing end through the elastic retainer to secure it.
18. Work from the hull upward along the forestay, clearing the other lines
away so there are no twists or tangles in the lines. Once you reach the
top of the forestay, locate the stainless mast clip. Identify the mast clip
by the three lines coming from it. The center line should be the forestay.
The lines on each side are called the shrouds.
C-18
Mast Clip
Forestay
(center)
Shroud
Aquaglide, Inc. #1 North Shore Dr, SE White Salmon, WA 98672
14
Retainer
Front
Shroud
TEL: (509) 493-4938
C-19
Bridle
Strap
19. Choose one shroud and connect it to one of the bridle straps on
the side of the hull using the stainless clip at the bottom of the shroud.
Repeat this process with the other shroud, making sure that the there
are no twists or tangles in the lines.
20. The finished sailing harness should look like the photo in C20, with
the mast clip at the top.
C-20 Mast Clip
Shroud
Bridle
Strap
for more info go to:
www.Aquaglide.net
FAX: (509) 493-4966
Shroud
Forestay
Shroud
Bridle
Strap