Aquaglide Multisport 270 Owner's Manual page 12

C-9
9. Reconnect the webbing to the rope using the ladder lock buckle.
10. Once connected, leave the bridle strap as long as possible. Tuck the
webbing end through the elastic retainer to secure it.
C-10
Front
11. Repeat steps C4 - C10 to install the second bridle strap on the
opposite side of the hull. Once completed, the hull should look like the
photo in C11 on the following page.
Aquaglide, Inc. #1 North Shore Dr, SE White Salmon, WA 98672
12
Back
Retainer
TEL: (509) 493-4938
C-11
12. Next, locate the last remaining webbing strap on the sailing har-
ness. This strap is part of the forestay, which goes to the front of the hull.
C-12
Forestay
for more info go to:
www.Aquaglide.net
FAX: (509) 493-4966
Front
Bridle Straps
Back
Front