Aquaglide Multisport 270 Owner's Manual page 11

C-3
3. To attach the bridle straps, first separate each into two parts by re-
leasing the webbing at the buckle. Begin on one side of the hull following
the steps to photos C4 - C10. The left (port) side of the hull is shown.
4. Push the rope loop of the bridle strap through the front shroud con-
nection as shown in photo C4.
C-4
5. Take the buckle end of the strap through the rope loop as shown in
photo C5.
C-5
Aquaglide, Inc. #1 North Shore Dr, SE White Salmon, WA 98672
Front
Shroud
Connection
Multisport
C-6
6. Tighten to secure.
7. Next, take the webbing loop through the back shroud connection.
C-7
8. Similar to the previous steps, take the plain end of the webbing
through the webbing loop and cinch to secure.
C-8
TEL: (509) 493-4938 FAX: (509) 493-4966
270 Owner's Manual
™
for more info go to:
www.Aquaglide.net
11