List of setting menus (continued)
SW MODE screen
Item
USER1
USER2
USER3
78
This is used to set which function is to be assigned to the USER1 button.
SYS FORMAT:
System format (Page 76)
SD MODE :
SD mode (Page 76)
SHOT MARK :
A shot mark is recorded on the clip. (Page 41)
TEXT MEMO :
A text memo is recorded. (Pages 44, 46)
LCD BL :
LCD backlight (Page 80)
V OUT OSD :
Video output on-screen display (Page 80)
AUDIO OUT :
Audio output (Page 79)
SLOT SEL :
P2 card slot selection (Page 51)
LCD RVS :
LCD reverse (Page 80)
WFM :
Waveform monitor (Pages 51, 81)
This is used to set which function is to be assigned to the USER2 button.
The settings of this item are the same as the USER1 item settings.
SHOT MARK
This is used to set which function is to be assigned to the USER3 button.
The settings of this item are the same as the USER1 item settings.
TEXT MEMO
Description of settings
The underlined settings are the factory mode settings.