Panasonic AG-HPG10P Operating Instructions Manual page 32

Thumbnail display (continued)
Names and functions of thumbnail display screen parts (continued)
3 Time display (Page 34)
Depending on what has been set, the time code
at the clip recording start point or the user's bit
at the clip recording start point, shooting time,
shooting date, shooting date/time or USER
CLIP NAME is displayed.
4 Recording mode
The recording mode of the clip where the
cursor is positioned is displayed.
5 System format
The recording format of the clip where the
cursor is positioned is displayed.
6 Duration
The duration of the clip where the cursor is
positioned is displayed.
7 USB HOST mode indicator
This appears when the USB HOST mode has
been selected.
8 Clip number
These are the numbers which have been set
by the unit for all the correctly recognized clips
on a P2 card. The numbers are allocated in
sequence starting from the earliest shooting
date/time. Clips which cannot be played
back because, for instance, they have wrong
recording formats are displayed in red.
9 Defective clip indicator
X
Unknown clip indicator
?
This indicates clips whose recording contains
problems for reasons such as the power being
cut off while they were being recorded. It may
be possible to repair clips which are indicated
by the yellow defective clip indicator. For further
details, refer to "Repairing defective clips"
(Page 36). It is not possible to repair clips which
are indicated by the red defective clip indicator
so delete them. If these clips cannot be deleted,
format the P2 card. In the case of clips with the
wrong formats,
32
is displayed instead of
?
10 ! Incomplete clip indicator
This appears when a single clip has been
recorded onto a multiple number of P2 cards
and one of the P2 cards concerned has not
been inserted into the P2 card slot.
11 M Shot mark indicator
This indicates clips where a shot mark has
been added to their thumbnails.
12 P Clip-with-proxy indicator
This indicates clips for which a proxy has been
additionally recorded.
13 T Text memo indicator
This indicates clips with text memo data.
14 E Edit-copy clip indicator
This indicates clips which have been edit-
copied by the AJ-HPM100 or other model which
supports the edit-copy function. For details on
the edit-copy function, refer to the operating
instructions of the model which supports the
function.
w
15 Wide indicator
This indicates clips which have been recorded
using the 16:9 aspect ratio. It does not indicate
clips which were formatted by a hard drive.
16 Remaining battery charge display
As the remaining charge drops, the display
changes in the following sequence:
When the charge is virtually depleted, the
(or
(While the AC adapter is being used, a display
other than
and not a sign of trouble.)
.
X
and .
) display changes to red.
may appear: this is normal