Set The User's Bit - Panasonic AG-HPG10P Operating Instructions Manual

5
After the time code value has been set,
press [MENU/MODE CHK].
6
Using , move to "YES", and press
TC PRESET
PRESET OK?
___
PUSH STILL
YES
NO
7
Press [MENU/MODE CHK] 2 times to release
the menu mode.

Set the user's bit

Setting user's bit allows you to store 8-digit
information (such as the date and time) in the
hexadecimal format on the sub code track.
User's bit is automatically saved in the memory
and retained after you turn off the power.
1
Hold down [POWER] for at least 2 seconds
to turn the power on.
2
Select "OFF" as the "1394 UB REGEN" item
setting on the setting menu "RECORDING
SETUP" screen.
• Basic operations on the setting menus. (Page
74)
3
Select "USER" as the "UB MODE" item
setting on the "RECORDING SETUP"
screen.
4
Select "YES" at the "UB PRESET" item
on the "RECORDING SETUP" screen, and
press .
RECORDING SETUP
UB PRESET
1394 IN PRESET
PUSH MENU TO RETURN
.
YES
5
Set the user's bit.
Using and , select the user's bit characters.
• You can use numbers from 0 to 9 and letters
from A to F.
UB PRESET
0 0 0 0 0 0 0 0
+/- : PUSH
SEL : PUSH
PUSH MENU TO RETURN
Using , move to the next digit, and press
and again to select the character.
UB PRESET
0
0 0 0 0 0 0 0
+/- : PUSH
SEL : PUSH
PUSH MENU TO RETURN
If [RESET/TC SET] is pressed while setting the
user's bit, the user's bit value will be reset to zero.
6
After the user's bit has been set, press
[MENU/MODE CHK].
7
Using , move to "YES", and press
UB PRESET
PRESET OK?
___
YES PUSH STILL
NO
8
Press [MENU/MODE CHK] 2 times to release
the menu mode.
.
53