Setting The Calendar - Panasonic AG-HPG10P Operating Instructions Manual

Setting the calendar

The "CLOCK SET" value is recorded on the data content (clips), and it affects the sequence in which the
thumbnails are played back. Before recording, be absolutely sure to check the "CLOCK SET" and "TIME
ZONE" settings, and set them if necessary. Described below is the procedure for setting the clock to 5:20
PM on May 25, 2007.
1
Hold down [POWER] for at least 2 seconds
to turn the power on.
2
Press [THUMBNAIL/MODE] to display the
thumbnail display off screen.
3
Press [MENU/MODE CHK].
• Basic operations on the setting menus. (Page
74)
4
At the "TIME ZONE" item on the setting
menu "OTHER FUNCTIONS" screen, change
the time difference from Greenwich Mean
Time using and
OTHER FUNCTIONS
PC MODE USB HOST
BEEP SOUND
CLOCK SET
TIME ZONE
POWER SAVE
LANGUAGE ENGLISH
SYSTEM FREQ 59.94Hz
USER FILE
PUSH MENU TO RETURN
5
Select "YES" at the "CLOCK SET" item on
the setting menu "OTHER FUNCTIONS"
screen.
OTHER FUNCTIONS
PC MODE USB HOST
BEEP SOUND
CLOCK SET
TIME ZONE
POWER SAVE
LANGUAGE ENGLISH
SYSTEM FREQ 59.94Hz
USER FILE
PUSH MENU TO RETURN
6
Press or to set "YEAR" to "2007".
CLOCK SET
YEAR 2007
MONTH APR
DAY 24
HOUR 13
MIN 7
+/ - : PUSH
SEL : PUSH /
PUSH MENU TO RETURN
Any year from 2000 to 2030 can be set.
, and press . (Page 82)
OFF
- - - -
0:00
OFF
- - - -
OFF
- - - -
YES
OFF
- - - -
/
7
Press to move the setting item to
"MONTH".
CLOCK SET
YEAR 2007
MONTH APR
DAY 24
HOUR 13
MIN 7
+/ - : PUSH
SEL : PUSH /
PUSH MENU TO RETURN
8
Press or to set "MONTH" to "MAY".
CLOCK SET
2007
YEAR
MONTH MAY
DAY
24
HOUR 13
MIN 7
+/ - : PUSH
SEL : PUSH /
PUSH MENU TO RETURN
9
Use the same method as in steps 4 and 5 to
set "DAY", "HOUR" and "MIN".
• The 24-hour clock system is used by this unit.
CLOCK SET
YEAR 2007
MONTH MAY
DAY 25
HOUR 17
MIN 20
+/ - : PUSH
: PUSH /
SEL
PUSH MENU TO RETURN
10
Press [MENU/MODE CHK] 3 times to
release the menu mode.
• An error will occur in the time so check that
the time is correct before shooting.
• If the unit is going to be used overseas,
do not set the "CLOCK SET" item to the
current time but input the time difference
from GMT using the "TIME ZONE" item.
/
/
/
23