Displaying The Sd Memory Card Information - Panasonic AG-HPG10P Operating Instructions Manual

Displaying the SD memory card information

You can display the usage statuses of the SD memory cards on the screen, and check them.
1
Display the thumbnail display screen.
2
Press [MENU/MODE CHK].
3
Using , and , select "PROPERTY"
– "DEVICES" – "SD CARD", and press
The following information is displayed.
SD STANDARD: Whether the SD memory
card has been formatted in
compliance with the SD/SDHC
standard is displayed.
SUPPORTED: The card format
complies with the SD/SDHC
standard.
NOT SUPPORTED: The card
format does not comply with the
SD/SDHC standard.
USED: Used memory [bytes]
BLANK: Free memory [bytes]
TOTAL: Total memory [bytes]
NUMBER OF Number of clips contained on
CLIPS: the SD memory card when the
clips were copied onto an SD
memory card with a proxy or P2
camera-recorder
PROTECT: Write-protect status
• Proxy recording is not possible with this unit.
4
Press "OK" ( ).
5
Press [MENU/MODE CHK] to exit the
procedure.
.
43