Lcd Monitor Settings - Panasonic AG-HPG10P Operating Instructions Manual

Basic operations (continued)

LCD monitor settings

1
Hold down [POWER] for at least 2 seconds
to turn the power on.
First check that an image is displayed on the
LCD monitor, and then adjust the angle of the
monitor to the position where it is easiest to see
its displays.
2
Press [THUMBNAIL/MODE] to display the
thumbnail display off screen.
3
Press [MENU/MODE CHK].
• Basic operations on the setting menus. (Page
74)
4
Using , , and
"LCD SET" item on the setting menu
"DISPLAY SETUP" screen.
DISPLAY SETUP
VIDEO OUT OSD
DATE/TIME
LEVEL METER
CARD/BATT
P2 CARD REMAIN
OTHER DISPLAY
LCD BACKLIGHT
LCD SET
PUSH MENU TO RETURN
5
Using and
LCD SET
LCD COLOR LEVEL
_
[ ]
LCD BRIGHTNESS
_
[ ]
LCD CONTRAST
_
[ ]
PUSH MENU TO RETURN
LCD COLOR LEVEL:
LCD BRIGHTNESS:
LCD CONTRAST:
22
, select "YES" for the
OFF
OFF
ON
ON
TOTAL
PARTIAL
YES
, select the item to be set.
[ + ]
[ + ]
[ + ]
This adjusts the color
density of the screen.
This adjusts the screen
brightness.
This adjusts the screen
contrast.
6
Using or , adjust the selected item.
7
Press [MENU/MODE CHK] 3 times to release
the menu mode.
• When [RESET/TC SET] is pressed, the adjusted
values of the selected items can be restored to
their factory settings.