Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer 6015C-
M3/6015C-MT. Installation and maintenance should be performed by experienced
technicians only.
The SuperServer 6015C-M3/6015C-MT is a high-end dual processor rackmount
server based on the SC813MTQ-520C 1U rackmount server chassis and the Su-
per X7DCL-3/X7DCL-i serverboard. The X7DCL-3/X7DCL-i supports dual Intel
5200/5100 Series processors in LGA771 sockets.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super X7DCL-3/X7DCL-i
serverboard and the SC813MTQ-520C chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6015C-
M3/6015C-MT into a rack and check out the server confi guration prior to powering
up the system. If your server was ordered without the processor and memory
components, this chapter will refer you to the appropriate sections of the manual
for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Preface
iii
Preface
®
Advertisement
Table of Contents
