Universal Serial Bus (Usb); Wake-On-Lan; Wake-On-Ring - Supero SUPERSERVER 6015C-M3 User Manual

Universal Serial Bus (USB)

There are two Universal Serial Bus
ports located on the I/O panel and
four additional USB headers located
on the serverboard. The headers,
labeled USB2/3 and USB4/5, can be
used to provide front side USB access
(cables not included). See the tables
on the right for pin defi nitions.

Wake-On-LAN

The Wake-On-LAN header is des-
ignated JWOL on the serverboard.
See the table on the right for pin
defi nitions. You must enable the LAN
Wake-Up setting in BIOS to use this
function. (You must also have a LAN
card with a Wake-On-LAN connector
and cable to use this feature.)

Wake-On-Ring

The Wake-On-Ring header is des-
ignated JWOR. This function allows
your computer to receive and be
"awakened" by an incoming call when
in the suspend state. See the table on
the right for pin defi nitions. You must
also have a WOR card and cable to
use this feature.
Chapter 5: Advanced Serverboard Setup
USB Ports Pin
Defi nitions (USB0/1)
Pin#
1
2
3
4
5
USB Headers
Pin Defi nitions (USB2/3, USB4/5)
USB2/4
Pin # Defi nition
1 +5V
2 PO-
3 PO+
4 Ground
5 Key
Wake-On-LAN
Pin Defi nitions
Pin#
1
2
3
Wake-On-Ring
Pin Defi nitions
Pin#
1
2
5-15
Defi nitions
+5V
PO-
PO+
Ground
N/A
USB3/5
Pin # Defi nition
1 +5V
2 PO-
3 PO+
4 Ground
5 No connection
(JWOL)
Defi nition
+5V Standby
Ground
Wake-up
(JWOR)
Defi nition
Ground (Black)
Wake-up