Internal Speaker; Power Led/Speaker - Supermicro SuperO X8DTL-3 User Manual

X8DTL-3/X8DTL-i/X8DTL-3F/X8DTL-iF User's Manual

Internal Speaker

The Internal Speaker, located at SP1,
can be used to provide audible indica-
tions for various beep codes. See the
table on the right for pin defi nitions.
Refer to the layout below for the loca-
tions of the Internal Buzzer (SP1).

Power LED/Speaker

On the JD1 header, pins 1-3 are used
for power LED indication, and pins 4-7
are for the speaker. See the tables
on the right for pin defi nitions. Please
note that the speaker connector pins
(4-7) are for use with an external
speaker. If you wish to use the on-
board speaker, you should close pins
6-7 with a jumper.
P2-DIMM3A
P2-DIMM2A
P2-DIMM1A
PHY
Chip
CPU2
X8DTL Series
LAN
CTRL
LAN
CTRL
Slot6 PCI-E 2.0 x8 (in x16 Slot)
Slot5 PCI-E 2.0 x4 (in x8 Slot)
W8379 5ADG
W8352 7HG
Slot4 PCI-E 2.0 x8
JPB
JP5
Slot3 PCI-E 1.0 x4
BMC CTRL
WPCM450-R
JI2C2
JPG1
J16
JI2C1
Slot2 PCI 33MHz
JWOL
JWD
B
JD1
Slot1 PCI 33MHz
T-SGPIO1
COM2 A
Buzzer
BIOS
USB2/3 USB4/5 USB6
SP1
T-SGPIO2
FAN1/
JPW3 JPW2 CPU2 FAN
JPW1
CPU1
FAN2/
CPU1FAN
FAN3
P1-DIMM1A
P1-DIMM2A
P1-DIMM3A
Intel
5500
(North Bridge)
JOH1
LSI SAS1068E
Intel
JBT1
ICH10R
(South Bridge)
Battery
JL1
JBAT1 3-SGPIO1
3-SGPIO2
JPS2
2-22
Internal Buzzer (SP1)
Pin Defi nition
Pin# Defi nitions
Pin 1 Pos. (+) Beep In
Pin 2 Neg. (-) Alarm
Speaker
PWR LED Connector
Pin Defi nitions
Pin Setting Defi nition
Pin 1 Anode (+)
Pin2 Cathode (-)
Pin3 NA
Speaker Connector
Pin Defi nitions
Pin Setting Defi nition
Pins 4-7 External Speaker
Pins 6-7 Internal Speaker
A. Internal Speaker (Buzzer)
B. PWR LED/Speaker