Chapter 4: AMI BIOS
Supervisor Password
This item indicates if a Supervisor password has been entered for the system. "Not
Installed" means a Supervisor password has not been used.
User Password
This item indicates if a user password has been entered for the system. "Not In-
stalled" means that a user password has not been used.
Change Supervisor Password
Select this feature and press <Enter> to access the submenu, and then enter a
new Supervisor Password.
User Access Level (Available when Supervisor Password is set as above)
Select Full Access to grant the User full access to the Setup Utility, and change
Setup settings. Select View Only to allow the user access to the Setup Utility and
view the settings without making changes. Select Limited to allow the user to change
selected settings such as Date and Time. Select No Access to prevent the User
from accessing the Setup Utility.
Change User Password
Select this feature and press <Enter> to access the submenu, and enter a new
User Password.
Clear User Password (Available only when User Password has been set)
This item allows you to clear a user password after it has been entered.
4-23