Supermicro SuperO X8DTL-3 User Manual page 83

•
Event Dir Type
•
Event Data.
Clear BMC System Event Log
Select OK and press the <Enter> key to clear the BMC system log. Select Cancel
to keep the BMC System log. The options are OK and Cancel.
Caution: Make sure that you no longer need any data stored in the event
log before clearing the BMC Event Log because you will not be able to
recover any data included in the event log once you've "cleared" it.

Set LAN Confi guration
Set this feature to confi gure the IPMI LAN adapter with a network address as shown
in the following graphics.
Channel Number - Enter the channel number for the SET LAN Confi guration com-
mand. This is initially set to [01]. Press <+> or <-> on your keyboard to change
the Channel Number.
Channel Number Status - This feature returns the channel status for the Channel
Number selected above: "Channel Number is OK" or "Wrong Channel Number".
IP Address Source
Select the source of this machine's IP address. If Static is selected, you will need
to know the IP address of this machine and enter it to the system manually in the
fi eld below. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host
Confi guration Protocol) server in the network it is attached to, and request the next
available IP address. The options are DHCP and Static.
The following items are assigned IP addresses automatically if DHCP is selected
under IP Address Source above:
IP Address
Enter the IP address for this machine. This should be in decimal and in dotted quad
form (i.e., 192.168.10.253). The value of each three-digit number separated by dots
should not exceed 255 as shown in the screen below.
Subnet Mask
Subnet masks tell the network which subnet this machine belongs to. The value of
each three-digit number separated by dots should not exceed 255.
Gateway Address
This is the IP address of the gateway in the network. This is usually a router.
4-21
Chapter 4: AMI BIOS