Supermicro SuperO X8DTL-3 User Manual page 74

X8DTL-3/X8DTL-i/X8DTL-3F/X8DTL-iF User's Manual
Confi gure SATA#1 as
This feature allows the user to select the drive type for SATA#1. The options are
IDE, RAID and AHCI. (When the option-RAID is selected, the item "ICH RAID
Code Base" will appear. When the option "AHCI" is selected, the item "SATA
AHCI" will be available.)
ICH RAID Code Base (Available when the option-RAID is selected)
Select Intel to enable Intel's SATA RAID fi rmware to confi gure Intel SATA RAID
settings. Select Adaptec to enable Adaptec's SATA RAID fi rmware to confi gure
Adaptec SATA RAID settings. The options are Intel and Adaptec.
SATA AHCI (Available when the option "AHCI" is selected)
Select Enable to enable SATA Advanced Host Interface support. (Take caution
when using this function. This feature is for advanced programmers only.) The
options are Enabled and Disabled. If the item is set to "IDE", the following item
will display.
SATA#2 Confi guration (Available when the option "IDE" is selected)
Selecting Enhanced will set SATA#2 to native SATA mode. The options are Disabled,
and Enhanced.
IDE Detect Timeout (sec)
Use this feature to set the time-out value for the BIOS to detect the ATA, ATAPI
devices installed in the system. The options are 0 (sec), 5, 10, 15, 20, 25, 30, and
35.
Primary IDE Master/Slave, Secondary IDE Master/Slave, Third IDE Master,
and Fourth IDE Master
These settings allow the user to set the parameters of the slots indicated above.
Press <Enter> to activate the following submenu. Set the correct confi gurations
accordingly. The items included in the submenu are:
Type
Select the type of device connected to the system. The options are Not Installed,
Auto, CD/DVD and ARMD.
LBA/Large Mode
LBA (Logical Block Addressing) is a method of addressing data on a disk drive.
In the LBA mode, the maximum drive capacity is 137 GB. For drive capacities
over 137 GB, your system must be equipped with a 48-bit LBA mode addressing.
If not, contact your manufacturer or install an ATA/133 IDE controller card that
supports 48-bit LBA mode. The options are Disabled and Auto.
4-12