Supermicro SuperO X8DTL-3 User Manual page 72

X8DTL-3/X8DTL-i/X8DTL-3F/X8DTL-iF User's Manual
Guardband Temperature (Closed Loop only)
This is the temperature applied to the DIMM temperature threshold. Each step
o
is in 0.5 C increment. The default is [006].
Inlet Temperature
This is the temperature detected at the chassis inlet. Each step is in 0.5
increment. The default is [070]. Press <+> or <-> on your keyboard to change
this value.
Temperature Rise
This is the temperature rise used for the DIMM thermal zone. Each step is in
o
0.5 C increment. The default is [020]. Press <+> or <-> on your keyboard to
change this value.
Air Flow
This is the air fl ow speed to the DIMM modules. Each step is one mm/sec. The
default is [1500]. Press <+> or <-> on your keyboard to change this value.
Altitude
This feature defi nes how many meters above or below sea level the system
is located. The options are Sea Level or Below, 1~300, 301~600, 601~900,
901~1200, 1201~1500, 1501~1800, 1801~2100, 2101~2400, 2401~2700,
2701~3000.
DIMM Pitch
This is the physical space between each DIMM module. Each step is in 1/1000
of an inch. The default is [400]. Press <+> or <-> on your keyboard to change
this value.
Intel VT-d
Select Enabled to enable Intel's Virtualization Technology support for Direct I/O VT-d
by reporting the I/O device assignments to VMM through the DMAR ACPI Tables.
This feature offers fully-protected I/O resource-sharing across the Intel platforms,
providing the user with greater reliability, security and availability in networking and
data-sharing. The settings are Enabled and Disabled.
SR-IOV Support
Single Root I/O Virtualization is an industry-standard mechanism that allows devices
to be shared simultaneously among several virtual machines. SR-IOV is capable
of partitioning a PCI function into several virtual interfaces in order to share the
resources of a PCI Express (PCIe) device under a virtual environment. The options
are Disabled and Enabled.
4-10
o
C