Jumper Settings; Explanation Of Jumpers; Sas Enable/Disable (X8Dt6/X8Dt6-F) - Supermicro X8DT6 User Manual

X8DT6/X8DT6-F/X8DTE/X8DTE-F User's Manual
2-7

Jumper Settings

Explanation of Jumpers

To modify the operation of the motherboard,
jumpers can be used to choose between
optional settings. Jumpers create shorts be-
tween two pins to change the function of the
connector. Pin 1 is identifi ed with a square
solder pad on the printed circuit board. See
the motherboard layout pages for jumper
locations.
Note: On two pin jumpers, "Closed"
means the jumper is on and "Open"
means the jumper is off the pins.

SAS Enable/Disable (X8DT6/X8DT6-F)

Jumper JPS1 allows you to enable or disable
the onboard SAS connections. The default
setting is Pins 1-2 to enable the connec-
tion. See the table on the right for jumper
settings.
Note: For information on LSI SAS RAID confi guration, please refer to
the LSI MegaRAID User's Guide @ http://www.supermicro.com/support/
manuals/.
FAN5
P1-DIMM3A
P1-DIMM3B
FAN6
P1-DIMM2A
P1-DIMM2B
P1-DIMM1A
P1-DIMM1B
CPU1 CP
FAN8/
CPU2 Fan
SLOT7 PCI-E 2.0 X8
SLOT6 PCI-E 2.0 X8
JPL1
SLOT5 PCI-E 2.0 X8
SLOT4 PCI-E 2.0 X8
JPL2
SLOT3 PCI-E 2.0 X4
SLOT1 PCI-E X4
JI2C2
JI2C1 JPG1
JPI2C1
JPW1
CPU2
P2-DIMM1B
P2-DIMM1A
P2-DIMM2B
P2-DIMM2A
P2-DIMM3B
P2-DIMM3A
X8DT6/E Series
TPM
JP7
JIBTN1
T-SGPIO1
I-SATA5 I-SATA2
T-SGPIO2
I-SATA4 I-SATA1
USB3 USB2
USB6/7 USB4/5
I-SATA3
I-SATA0
JWF1 JWD
2-28
Connector
Pins
Jumper
Cap
Setting
SAS Enable
Jumper Settings
Jumper Setting Defi nition
1-2 SAS Enabled (Default)
2-3 SAS Disabled
JPW2
JPW3
FAN1
A. SAS Enable (X8DT6/
FAN7
CPU1 Fan X8DT6-F
LE1
FAN2
FAN3
Rev. 2.01
SP1
LED1
SAS0~3
SAS4~7
JPS1 A
JL1
3 2 1
3 2 1
Pin 1-2 short