3.5.2. When there is a flying wheel,
3.5.2.1. Fix the flywheel to prevent the tooth ring
from turning
3.5.2.2. Then tighten bolt of tensional vibration
damper.
3.6. Install timing belt cover
Install seal strip in the position shown as right
figure. Install the position 1 and position 2 before
cylinder head assembly; install position 3 before
tighten water pump.
Install the timing belt cover, screw the bolt
manually, and then tighten them with a tool.
Torque: 6±1N.m
3.7 Install water pump pulley
Torque: 6±1N.m
63