Recording Video Clips - HP PHOTOSMART 730 Series User Manual

Recording video clips

1
Frame the subject for your video
in the viewfinder.
2
Press and release the
button to start recording
video. Both the red viewfinder
light and the Video/Self-Timer light will turn on solid. A
video icon and a Time Remaining counter appear in the
Status LCD and at the top of the Image Display (if it is on).
NOTE
If you have the Self-Timer mode on (see
mode on page 35), the camera will start recording 10
seconds after you press the
3
To stop recording, press the
The length of a video clip is limited only by the amount of
available memory. The camera calculates the Time Remaining
(mm:ss) counter based on the amount of available memory
(internal or memory card). The video ends when Time
Remaining reaches zero or the
After recording has stopped, the last frame of the video clip
remains on the Image Display for instant review. During this
time, the video clip is saved to memory unless you choose to
delete it by pressing the
NOTE
Audio is automatically recorded with video clips.
24
Video
button.
button again.
button is pressed again.
OK button.
hp photosmart 730 series user's manual
Using self-timer