Table of Contents
Advertisement
Problem
The camera
does not take
a picture
when I press
the Shutter
button.
(continued)
My image is
blurry.
Chapter 7: Troubleshooting and support
Possible cause
The camera is
still saving the
last picture you
took.
Images in the
memory
(internal or
card) may be
corrupted.
Your subject
was too close to
the camera
lens.
You moved the
camera while
you took the
picture.
The light is low
and the flash is
set to
Flash
Off.
The camera
focused on the
wrong thing, or
was unable to
focus.
Solution
Wait a few seconds for the
camera to finish processing the
image, and then press the
button.
Format the memory. (See
page 50)
Use Macro mode for close-up
shots. Do not try to get closer than
the camera's minimum focus
range (See
Using macro mode
page 36)
Hold the camera steady as you
press the
Shutter
tripod.
In dim light, the camera requires
a longer exposure. Use a tripod
to hold the camera steady,
improve lighting conditions, or
the flash To
Flash On
page 30).
Use
Focus
Lock. (See page 23.)
Shutter
on
button or use a
(see
79
Advertisement
Table of Contents
