HP PHOTOSMART 730 Series User Manual page 62

NOTE
If your computer is running Windows XP, when you
turn on the camera in the next step, a dialog box may
appear that requests you to
for this action. Simply click on
box.
3
Turn on the camera. The HP Image Unload software will
launch on your computer. If you have set the software to
automatically unload the images in the camera, the images
will automatically unload to the computer. Otherwise, in the
Welcome screen, click
images in the camera that were selected in the
for printing or
are started after the images have been unloaded to the
computer.
4
When the unload screen on the computer says Finished,
your images have been saved and shared. You can now
disconnect the camera from the computer.
NOTE
To unload images to a computer that does not have the
HP Photo & Imaging software installed on it, change the
USB Configuration
See USB configuration
camera to appear as another disk drive on the computer
so that you can easily copy the image files from the
camera to the hard drive of your computer.
NOTE
If you used a memory card in your camera, another
way to unload images from the card to a computer is to
use a memory card reader or one of the memory card
slots available in HP Photosmart printers. See the manual
for your HP Photosmart printer for instructions on how to
do this.
62
Start
HP Instant Share
setting to
on page 69. This allows the
hp photosmart 730 series user's manual
Select the program to launch
Cancel to close this dialog
Unload. If there were any
destinations, those actions
Disk Drive in the
Share menu
Setup menu.