Changing Capture Modes - HP PHOTOSMART 730 Series User Manual

Changing capture modes

The Mode button on the top of the camera sets the camera to
one of nine different capture modes. Each time you press the
Mode button, the camera changes to the next capture mode.
The sequence for the different settings is: Normal, Self-Timer,
Burst, Macro, Action, Landscape, Portrait, F2.6, F4.9, and then
repeat.
NOTE
These settings do not have any effect on recording
video clips unless specifically noted otherwise.
Each time you change the capture mode, an icon representing
that capture mode appears in the Status LCD. If
the icon also appears in the Image Display. The following table
describes these different icons.
Icon Setting
None Normal
Self-Timer
Burst
Macro
Chapter 2: Taking pictures and recording video clips
Description
Camera automatically selects focus,
aperture and shutter speed. This is the
default setting when the camera is first
turned on.
Camera waits 10 seconds after the
button or Shutter
video clip or a picture. See
mode on page 35.
Camera quickly takes multiple still pictures
(as long as the
See Using burst mode
Camera takes extreme close-up pictures.
See Using macro mode
Live View
button is pressed to take a
Using self-timer
Shutter button is held down).
on page 36.
on page 36.
is on,
Video
33